BegerDrite Prevent Plus 50 EC

Step 1 Surface preparation: Prepare the ground before use by removing all wood and wood debris that termites feed on

Step 2 Mixing BegerDrite: - Shake the container and mix with water at the specified ratio of 1:100 (1,000 ml per 100 liters of water), e.g. 1,000 ml per 100 liters of clean (sediment-free) water, in a prepared container. - Stir for about 2-3 minutes until well mixed before use. Always use up all of the diluted BegerDrite Prevent Plus 50 EC; do not store it for later use. - Pour the diluted BegerDrite Prevent Plus 50 EC into a watering can or sprayer tank carefully so the diluted solution does not come into contact with your skin

Step 3 Applying BegerDrite as a soil treatment: pour BegerDrite Prevent Plus 50 EC evenly over the ground around the house or building after the roof is on and before pouring concrete. (Injecting the solution into the pipe system under the building, or drilling the floor to inject it, should be done by a specialist with suitable equipment such as a high-pressure pump, wearing gloves, a mask and other suitable protective equipment)