Beger Sanding Sealer B-5000/599 (2K)

Application system. 1. Surface preparation 1.1 If the wood has been painted before and the film is peeling, or it is old wood that has never been painted, sand it back to the bare wood. For new wood, sand off excess wood fibers. Then clean the surface so it is free of grease, dust, oil and foreign matter. 1.2 Surfaces with mould must have all the mould removed with bleach, then be rinsed with clean water and left to dry completely. 1.3 If the wood has resin, wipe off the resin with Thinner M-77

2. Primer: 2.1 For softwood, after surface preparation apply 1 coat of Beger B-6900 wood preservative as an anti-fungal, anti-termite, anti-wood-borer and anti-insect primer, and let it dry for 1-2 hours. 2.2 Apply 1 coat of Beger Wood Sealer B-2000 resin-blocking primer and let it dry for about 1-2 hours; no sanding is needed. 2.3 Mix Beger Sanding Sealer 2-component B-5000/599, Part A : Part B : Thinner M-50 at a ratio of 1:1:1. 2.4 Apply 1 coat, let it dry for about 1-2 hours, then lightly sand with No. 320 wet sandpaper and brush clean. 2.5 Fill holes or nail heads with Beger Wood Filler in a shade close to the wood, leave for 30 minutes, then sand and clean. Then apply 3-4 coats of a Beger polyurethane product such as Unithane B-52, Polyurethane B-5000, Diamond Polyurethane or Polyurethane B-5000 Color