Beger Wood Preservative B-6900

Application system. 1. Surface preparation 1.1 If the wood has been painted before and the film is peeling, or it is old wood that has never been painted, sand it back to the bare wood. For new wood, sand off excess wood fibers. Then clean the surface so it is free of grease, dust, oil and foreign matter. 1.2 If the wood has resin, wipe off the resin with Thinner M-77. 1.3 Fill holes or nail heads with Beger Wood Filler, leave for 30 minutes, then sand and clean

2. Primer: 2.1 For softwood, apply 1 coat of Beger B-6900 wood preservative as an anti-fungal, anti-termite, anti-wood-borer and anti-insect primer, and leave for 1-2 hours before over-coating with Beger wood stain, Beger wood floor stain or other Beger wood products