Beger SUPER GOLD A/P 1002

Step 1 Surface preparation: New plaster – let the plaster dry completely for at least 1 month, with moisture content below 14%, then clean off all grease and dust. Old plaster – scrub off all loose and deteriorated old paint (do not use a wire brush) and wash the surface clean. If there is mould or moss, scrub it off first, then apply a generous coat of Beger MouldFree M-001 mould and moss remover without rinsing. After cleaning, apply 1 coat of Beger Pro Quick Primer B-1900 multi-purpose plaster primer. Wood – for old wood that has never been painted, or wood with a peeling, deteriorated paint film, sand back to the bare wood. For new wood, sand off excess wood fibers and clean the surface of dirt. To protect the wood from mould, termites, wood borers and other wood-boring insects, apply 1 coat of clear BegerDrite (water-based or oil-based)

Step 2 Primer: - Brush or spray 1 coat of A/P 1002 yellow acrylic primer. It can be thinned with 5-10% clean water, depending on the application

Step 3 Gold paint: - Apply 2-3 coats of Beger gold paint A/C 919 or A/C 707 (it can be thinned with clean water at a paint : water ratio of 1:1 to 1:2). - For extra gloss, finish with A/C 9000 gloss acrylic lacquer