BegerShield Art Effects Loft

1. Clean the surface of dust. 2. Apply masking tape to mark out the area to be painted

3. For new plaster with moisture content no higher than 14%, you can apply the texture paint directly. For old plaster, apply 1 coat of B-1500 old plaster primer. 4. Creating the Loft plaster pattern, round 1: portion out the paint according to the area and mix with no more than 10% Thinner M-33, then use a BA-43 trowel to spread it over the whole wall. Or, to save time, mix with no more than 15% Thinner M-33 and roll it over the whole wall with a 4-inch roller. Let it dry for about 30 minutes. *** If ridges form between trowel strokes, lightly sand and wipe clean before creating the pattern in round 2

5. Creating the Loft plaster pattern, round 2: for a smooth finish, add 5% more Thinner M-33 than in round 1 and spread the paint over the whole wall with a BA-43 trowel, as in round 1. Let it dry for about 2 hours. *** If you are not happy with the pattern or the wall is not yet smooth, apply a 3rd round. 6. Coat the wall with cream wax using a BA-43 trowel, pressing it on thinly over the whole wall in 1 pass. *** For a glossy wall, buff lightly with a soft cloth