Beger SUPER PEARL A/L 1800

Step 1 Surface preparation: The surface must be dry, clean and free of dust, powder, rust, grease and dirt. If the surface has mould, clean it completely first with bleach, rinse thoroughly, let dry and then apply Beger MouldFree M-001. If the wall has cracks, fill cracks narrower than 0.3 mm with Beger Acrylic Filler F-200, or repair cracks wider than 0.3 mm with Beger Acrylic Sealant, and sand the repairs smooth before painting. For glossy steel or metal surfaces, sand with No. 200-280 sandpaper to increase the bonding area. Remove any rust completely

Step 2 Primer: Plaster: apply 1 coat of Beger B-1900 multi-purpose plaster primer. Wood / metal: prime with 1 coat of Krathing RustTech 2 in 1 anti-rust primer and topcoat in white, thinned with Beger Thinner M-77 or Krathing Thinner AAA at 10-15%

Step 3 Topcoat: for brushing, mix Beger Super Pearl with Beger Thinner M-77 at a ratio of 1:1. For spraying, mix with thinner at a ratio of 1:1.5 (topcoat : thinner)