Step 1

Step 1 Surface preparation - The surface must be sound, clean, and free of dust and oil - If the surface has large cracks or deep holes, we recommend repairing them with Beger Repair Mortar multi-purpose repair mortar - Smooth, glossy surfaces must first be sanded with coarse sandpaper - Areas with mould or moss should be scrubbed clean with Beger Mouldfree M-001 fungicide and left to dry for at least 24 hours - Dampen the surface thoroughly with water before applying the waterproofing cement

Step 2

Step 2 Mixing - Mix Beger Flex Shield 1K at a ratio of 2.8 : 1 by weight, i.e. 20 kg with 7 liters of water, or 4 kg with 1.4 liters of water - Mix with a low-speed drill (400-600 rpm) for about 3 minutes until uniform, then leave for 1-2 minutes so the mixture is fully saturated (use it all within 1 hour or less)

Step 3

Step 3 Waterproofing application: First coat: brush or roll onto the surface while it is still damp, to a thickness of about 1 mm per coat (use Fiber Mesh to reinforce adhesion at wall joints), then let it dry for 2-4 hours before applying the 2nd coat. Second coat: apply the 2nd coat in the opposite direction to the first, at a rate of 2 kg/ 1 sq.m./ 2 coats

Beger Flex Shield 1K Cement Waterproof

Product Overview

Appropriate Usage

Product Detail

PRODUCT FEATURES

Product Overview

Appropriate Usage

QUALIFICATION

Product usage instructions

Step 1

Step 2

Step 3

TECHNICAL SPECS

Beger Color Design

Beger Flex Shield 1K Cement Waterproof

Product Overview

Appropriate Usage

Related Products

Product Detail

PRODUCT FEATURES

Product Overview

Appropriate Usage

QUALIFICATION

Product usage instructions

Step 1

Step 2

Step 3

TECHNICAL SPECS

Beger Color Design