BegerCool All Plus 10 Semi-gloss

Step 1 Surface preparation: New plaster – let the plaster dry completely for at least 1 month, with moisture content below 14%. Old plaster – scrub off deteriorated old paint; areas with mould or moss must be scrubbed with Beger MouldFree M-001. Caution: before every application, clean the surface so it is free of dust and cement residue, or sand off all dust first, and remove grease and other dirt. Repair and fill cracks in the surface with Beger Acrylic Filler No. 200

Step 2 Primer: improves the topcoat's adhesion to the surface and prevents chemical reactions between the surface and the topcoat. New plaster: apply 1 coat of BegerCool All Plus No. 6000 alkali-resistant (heat-reflective) primer for new plaster and let it dry for at least 2-4 hours, or 1 coat of B-2800 water-based 3-in-1 flexible multi-purpose plaster primer (heat-reflective white film) and let it dry for at least 2-4 hours before applying the topcoat. Old plaster: apply 1 coat of Beger Pro Quick Primer B-1900 moisture-resistant multi-purpose plaster primer and let it dry for at least 4-6 hours. For maximum heat protection, we recommend over-coating with 1-2 coats of BegerCool Flex No. 9000 elastomeric alkali-resistant (high heat protection) primer for new plaster and letting it dry for at least 3 hours before applying the topcoat

Step 3 Topcoat: apply 2 coats of BegerCool All Plus 100% acrylic water-based paint, letting the first coat dry completely for 2-3 hours before the next coat