Beger Sanding Sealer B-2400

Application system. 1. Surface preparation 1.1 If the wood has been painted before and the film is peeling, or it is old wood that has never been painted, sand it back to the bare wood. For new wood, sand off excess wood fibers. Then clean the surface so it is free of grease, dust, oil and foreign matter. 1.2 Surfaces with mould must have all the mould removed with bleach, then be rinsed with clean water and left to dry completely. 1.3 If the wood has resin, wipe off the resin with Thinner M-77

2. Primer: 2.1 For softwood, after surface preparation apply 1 coat of Beger B-6900 wood preservative as an anti-fungal, anti-termite, anti-wood-borer and anti-insect primer, and let it dry for 1-2 hours. 2.2 Stir Beger Wood Sealer B-2000 thoroughly before and during application; do not add thinner. 2.3 Apply 1 coat of Beger Wood Sealer B-2000 resin-blocking primer and let it dry for about 1-2 hours; no sanding is needed. 2.4 Stir Beger Wood Sealer B-2400 thoroughly before and during application; do not add thinner. 2.5 Apply 2 coats of Beger Sanding Sealer B-2400 grain-filling primer (about 1-2 hours between coats). 2.6 Once Beger Sanding Sealer B-2400 has dried, sand only the uneven areas. 2.7 Fill holes or nail heads with Beger Wood Filler in a shade close to the wood, leave for 30 minutes, then sand and clean. 2.8 Finish with your chosen Beger wood coating product