Beger SKIM COAT 101

Step 1 Surface preparation: The surface must be clean and free of dust, powder, cement residue and grease. Chip or grind off structural seams and protruding ridges before skim-coating. Wet the surface thoroughly before skim-coating

Step 2 Application: mix Beger Skim Coat 101 with cement or gypsum (1:1 by weight) and stir until smooth, then skim the mixed Beger Skim Coat over the whole surface. Apply at least 2 layers, letting each dry for 1-2 hours before the next. When completely dry, sand with No. 280 or No. 400 sandpaper and remove the dust before applying new plaster primer. Apply 2 coats of any Beger topcoat according to the correct paint system