Beger SKIM COAT 102 White

Step 1 Surface preparation: New plaster – the surface must be clean and free of dust, powder, cement residue and grease. Chip or grind off structural seams and protruding ridges before skim-coating. Old plaster – clean the surface and strip off all the old paint film. If there is mould or moss, remove it with Beger MouldFree M-001 mould and moss remover, then apply 1 coat of Beger old plaster primer to improve adhesion

Step 2 Application: skim with Beger Skim Coat 102 and let it dry for 2-3 hours before the next layer. Once you reach the desired thickness, sand evenly with No. 280 or No. 400 sandpaper and wipe clean. Apply 1 coat of Beger primer according to the correct paint system, then 2 coats of any Beger topcoat according to the correct paint system