Beger Thinner M-68

How to use. Equipment: roller, brush and spray gun

Mixing before use: for brush or roller application, thin 0-10% by volume. This 2-component epoxy paint consists of the paint base (Part A) and the hardener (Part B). The mixing ratio of Part A and Part B is shown on the side of the can or in the product's technical data sheet. Pour all of the Part B hardener into the Part A paint base at the specified ratio and stir until uniform, then add Thinner M-68 at a suitable ratio (0-10% by volume). If the paint becomes thick while brushing or rolling, you can add more Beger Thinner M-68 and stir until uniform

Tips: the surface temperature should not be below 10°C and should be at least 3°C above the dew point; measure the temperature and relative humidity around the work area. Good ventilation ensures complete curing. The top paint film should not come into contact with oil, chemicals or mechanical stress until fully cured. High-pressure water washing leaves the surface damp, so relative humidity should not exceed 85%. The surface must be free of moisture before painting, as moisture can cause joint marks