Beger Wood Guard

1. Surface preparation 1.1 If the wood has been painted before and the film is peeling, or it is old wood that has never been painted, sand it back to the bare wood. For new wood, sand off excess wood fibers. Then clean the surface so it is free of grease, dust, oil and foreign matter. 1.2 If the paint film is in good condition and you want to recoat with the same type of paint, scuff the film with No. 320 sandpaper and then clean the surface so it is free of grease, dust, oil and foreign matter. 1.3 If the wood has resin, wipe off the resin with Thinner M-77. 1.4 Fill holes and nail heads with Beger Wood Filler, leave for 30 minutes, then sand and clean

2. Primer: 2.1 Apply 1 coat of Beger Wood Sealer B-2000 wood primer and let it dry for about 2 hours; no sanding is needed after priming

3. Topcoat: 3.1 Apply 2 coats of Beger WoodGuard, letting it dry for about 2 hours before the next coat. It can be thinned with 10-15% clean water. After application, let it dry for 1 day. Tip: 3.2 For softwood, after surface preparation apply 1 coat of Beger B-6900 wood preservative as an anti-fungal, anti-termite, anti-wood-borer and anti-insect primer, and let it dry for 1-2 hours