Delight WoodStain Plus

Step 1 Surface preparation: Old wood – if the surface was previously coated with paint or a hard-coat finish, sand back to the bare wood or use Beger Unisoft paint remover (if you use paint remover, wash the surface with detergent so no residue remains). Brush off all dust. For old wood, wipe it clean with Beger Thinner M-1199 and let it dry completely. New wood – if the wood has resin, wipe it once with Beger Thinner M-77 and let it dry for at least 30 minutes to 1 hour. If the wood has no resin, clean the surface in the normal way so it is free of grease and dust, and test the color on a small area to check that the shade is what you want. For softwood, apply 1 coat of Beger B-6900 anti-fungal and anti-insect wood primer and let it dry for 1-2 hours. If the wood has cracks or holes, fill them with Beger Wood Filler first

Step 2 Applying the wood stain: - Open and stir Beger Delight Plus WoodStain well before applying, and stir regularly during application so the pigment stays evenly dispersed. - Apply along the wood grain one board at a time, covering all sides for maximum protection, with at least 2 coats. - Allow 3-4 hours between coats. - Do not apply when the surface moisture is unusually high, such as just before or after rain. - Do not brush across the grain, to reduce brush marks. - For exterior wood, do not apply more than 3 coats so the wood can release moisture properly. *For spraying, or when applying in hot weather, thin with about 5-10% Beger Thinner M-1199 for easier application