What is Beger Cement Tile-Bond and how to use it for firmly installing tiles?

Cement Adhesive is a construction material that plays a crucial role in the quality of tile installation. With superior adhesion properties compared to regular cement, it has become widely popular among both professional craftsmen and general users who seek strength, durability, and a neat surface finish. Beger Cement Tile-Bond is a high-quality cement adhesive product specifically developed for tile installation. With a special blend of cement and bonding agents, it can be used with various types of tiles, such as floor tiles, wall tiles, granite, natural stone, mosaic tiles, or even for overlaying existing tiles. This article will help you understand what cement adhesive is, its outstanding properties, and the correct usage methods, along with introducing each model of Beger Tile-Bond to ensure you can choose the right one for your specific work requirements and be confident that your tile installation will “adhere firmly and last long” like a professional.

Why Choose Beger Cement Tile-Bond?

Beger Tile-Bond is a product cement adhesive for floor and wall tile installation that uses high-quality raw materials imported from Germany, combined with Diamond Bond Technology, which provides 4 times better adhesion* and is developed according to modern tile installation standards, focusing on adhesion strength, flexibility, and ease of use. It is suitable for both indoor and outdoor applications and is available according to work characteristics as follows: 1. Beger Cement Tile Bond Expert T-100 2. Beger Cement Tile Bond Super T-200 3. Beger Cement Tile Bond Premium T-300

*Adhesion tested by the Asian Institute of Technology according to ISO 13007 standards with the product Beger Cement Tile Bond Expert T-100

Beger Cement Adhesive Green Bag Tile-Bond Expert T-100

Beger Cement Adhesive Green Bag Tile Bond Expert T-100 is a standard adhesive suitable for general floor and wall tile installation, both outdoors and indoors, with a maximum size of 90×90 cm, which is larger than regular cement adhesives (for 90×90 cm size, recommended for floors only). It can withstand weather conditions well, and the product’s flexibility makes it easy to lay tiles.

Beger Cement Adhesive Red Bag Tile-Bond Super T-200

Beger Cement Adhesive Red Bag Tile Bond Super T-200 is suitable for use in high-moisture areas, such as swimming pools, and supports large tiles up to 100×100 cm (for 100×100 cm size, recommended for floors only).

Beger Cement Tile Bond Premium T-300

Beger Cement Tile Bond Premium T-300 The highest performance cement adhesive from Beger, providing excellent adhesion. It can be applied over various surfaces such as existing tiles, plywood, or fiber cement. It offers maximum durability in all conditions, high moisture resistance, and high flexibility, with excellent vibration resistance. Suitable for installing large tiles up to 120×120 cm.

Compare the properties of Beger Cement Adhesive across 3 models

*Recommended for use with floor tiles only

How to Use Beyer Adhesive Mortar

Step 1 Prepare the Surface

Before starting, clean the surface of the area where you want to install tiles and the back of the tiles to be free from dust for maximum adhesion efficiency.

Step 2 Mix the Adhesive Mortar According to the Ratio

Mix the adhesive mortar with clean water in a ratio of 1 : 3, which means 1 part adhesive mortar (20 kilograms) to 3 parts clean water (4.6 – 4.8 liters), then mix thoroughly with a low-speed mixer and let it sit for 3-5 minutes.

Step 3 Troweling

Spread the mixed adhesive mortar on the desired surface, then use a notched trowel to create grooves evenly along the length. For better adhesion, you may also apply adhesive mortar on the back of the tiles.

Step 4 Tile Installation

Place the prepared tiles onto the adhesive mortar, pressing the tiles onto the cement adhesive. Adjust the level using a tile alignment tool within 10 – 15 minutes. After tiling, allow it to set for about 24-48 hours before using the area.

Step 5 Use Grout to Fill Tile Joints

Once the cement is fully dry, remove the tile alignment tool and fill the tile joints with Beyer Tile Bond Plus Grout, a grout that prevents black mold and bacteria, available in more than 10 colors. Allow it to dry for at least 1 – 3 days before use.

Frequently Asked Questions

How can I know how much adhesive mortar I need for tiling?

– 1 bag of Beger adhesive mortar (20 kilograms) can cover an area of approximately 2 – 8 square meters, depending on the size and design of the tiles. Therefore, it is recommended to calculate the amount of tiles needed first to determine the quantity required.

Can I use regular cement instead of adhesive mortar?

– It is not advisable. Regular cement does not adhere to surfaces as well as adhesive mortar. Therefore, it is better to choose products specifically designed for tile adhesion.

Are there any precautions when using adhesive mortar?

– It is recommended to use the adhesive mortar that matches the size of the tiles it supports. Choosing the wrong type may result in damage to the tiles.

I want an adhesive mortar that can be applied over existing tiles without removing them. Which Beger adhesive mortar should I choose?

– In this case, it is recommended to use the Beger Tile-Bond Premium T-300.