Beger 110 SKIM COAT Smooth

Step 1 Surface preparation: - New plaster should be left to dry for at least 2 weeks. - The surface to be skim-coated with Beger 110 Skim Coat Smooth must be sound, clean and free of dust, cement residue, paint and grease. - If old plaster is loose or flaking, apply an old plaster primer first to improve the adhesion of the surface. - Chip or grind off formwork seams and protruding ridges that are too thick. - If the surface has large cracks or deep holes, repair them first. - Dampen the area slightly before skim-coating

Step 2 How to use: - Mix Beger 110 Skim Coat Smooth 20 kg (1 bag) with 8.5-9.5 liters of clean water, or until it reaches a suitable consistency, and blend with a low-speed drill until smooth. - Apply thinly and evenly with a steel trowel; each pass can be 0.3-2 mm thick. - For a thicker surface, apply another pass, letting the first layer dry for about 1-2 hours before the next. - Let the skim coat dry for about 4-6 hours, then sand as needed for a smoother finish. - Let it dry for 3-7 days (depending on the weather) before painting according to the system

Additional tips: - Once mixed, use within 40-60 minutes. - Do not work in hot conditions such as strong sunlight, as the material will dry too quickly to work and may develop fine cracks. - Not suitable for applying thickly in a single pass. - Do not use in areas that are constantly submerged in water. - Not suitable for active cracks, cracks that keep getting wider or longer, or moving structural joints. - Plaster or tiles (with tile adhesive) cannot be applied over Beger 110 Skim Coat Smooth; remove the Beger 110 Skim Coat Smooth layer first. - For finishing walls or ceilings only; not suitable for floors. - Wear protective equipment such as gloves, a dust mask and goggles. In case of eye contact, rinse several times with clean water and see a doctor promptly. - Clean tools with water after use, before the material dries. - Store in a dry place free from moisture and not too hot, as this may deteriorate the product. - Shelf life is 1 year from the date of manufacture in an unopened container stored in a dry place