Step 1
Directions for use 1. The material surface must be clean and free of oil and dust. 2. Cut the nozzle tip to a width of 4-6 mm and apply the nail adhesive in lines or dots onto the surface to be bonded. 3. Once the nail adhesive has been applied in place, you have 3-5 minutes to adjust the position as required. 4. Leave for 12-72 hours before use, depending on the temperature and the thickness of the nail adhesive. Application methods - Lightweight materials: apply in lines, press the pieces together, then pull them apart and let the adhesive become tacky for 3-5 minutes, then press them together again; leave to dry for 24 hours before use - Heavy materials: apply in 4-6 mm zigzag lines, hold in place with clamping tools; leave to dry for 24 hours before use - Materials with uneven surfaces: apply in dots all over, spaced appropriately, hold in place with clamping tools; leave to dry for 24 hours before use - Insulation boards: apply in lines, hold in place with clamping tools; leave to dry for 48-72 hours before use Storage 12 months from the date of manufacture in the sealed packaging. Store in a dry place, away from direct sunlight, at a temperature between +10 and +30 degrees Celsius
