Nano-1 Semi-Gloss

Step 1 Surface preparation: New plaster – let the plaster dry completely for at least 1 month, or until its moisture content is below 14%. Old plaster – scrub off deteriorated old paint; areas with mould or moss must be scrubbed with Beger MouldFree M-001, then washed clean and left to dry for 2-3 days. Caution: - Before every application, clean the surface so it is free of dust, cement residue, grease and other dirt, or sand off all dust first. - Repair cracks in the surface (narrower than 0.3 mm) with Beger Acrylic Filler No. 200 and sand smooth before painting

Step 2 Primer: New plaster: apply 1-2 coats of Nano One #1400 alkali-resistant primer for new plaster (exterior and interior) and let it dry completely for at least 2-3 hours before applying the topcoat. Old plaster: apply 1 coat of Beger Contact Primer B-1500 old plaster primer and let it dry completely for at least 6-8 hours before applying the topcoat

Step 3 Topcoat: apply 2-3 coats of Nano One 100% acrylic water-based paint