Beger Clear Contact Primer B-1500

Step 1 Surface preparation: The surface must be dry, clean and free of grease and dust. Surfaces with mould must be cleaned completely first with bleach, rinsed thoroughly, left to dry and then treated with Beger MouldFree M-001. For walls with cracks, fill cracks narrower than 0.3 mm with Beger Acrylic Filler F-200, or repair cracks wider than 0.3 mm with Beger Acrylic Sealant, and sand the repairs smooth before painting. Good surface preparation with no dusty or loose areas gives Beger Contact Primer B-1500 the best adhesion

Step 2 Primer and topcoat: apply 1-2 coats of Beger Contact Primer B-1500, followed by 2 coats of your chosen Beger 100% acrylic water-based topcoat