Beger Acrylic Filler F-200

Step 1 Surface preparation: The surface must be clean and free of dust, powder, cement residue and grease. If there is mould or moss, remove it with Beger MouldFree M-001 mould and moss remover

Step 2 Application: use Beger Acrylic Filler F-200 to fill cracks smaller than 1 mm with a clean trowel or putty knife (for deep, wide cracks, fill 2-3 times in thin layers, about 1 hour apart). When the filler is completely dry, sand smooth with fine sandpaper. Apply 1 coat of Beger primer according to the correct paint system, then 2 coats of any Beger topcoat according to the correct paint system