BegerCool Roof Primer #8000

Step 1 Surface preparation: The surface must be dry, clean and free of grease, dust, powdery rust and loose material. Surfaces with mould: clean them completely first with bleach, rinse thoroughly, let dry and then apply Beger MouldFree M-001. Surfaces with cracks: fill cracks narrower than 0.3 mm with Beger Acrylic Filler No. 200, or repair cracks wider than 0.3 mm with Beger Acrylic Sealant, and sand the repairs smooth before painting

Step 2 Primer: New concrete tiles: 1-2 coats of BegerCool Roof No. 8000 elastomeric primer for improved adhesion on concrete tiles. Steel roofs: 1-2 coats of BegerCool Roof No. 7000 elastomeric primer for improved adhesion on steel. Old plaster: apply 1 coat of Beger Multi-Purpose Primer B-1900 multi-purpose old plaster primer and let it dry for at least 6-8 hours before applying the topcoat

Step 3 Topcoat: apply 2-3 coats of BegerCool Roof 100% acrylic flexible water-based roof paint (maximum heat protection)