Synotex Shield Max

How to use. Step 1: Surface preparation. Let the surface dry completely for at least 1 month, until its moisture content is below 14%. Before every application, remove all dust, powder, cement residue, grease, mould, moss and old peeling paint from the surface. Remove mould and moss with Beger MouldFree M-001 water-based mould and moss remover (for old plaster). Repair and fill cracks with Beger Acrylic Filler F-200 for small cracks (up to 1 mm)

Step 2: Primer. New plaster: apply 1 coat of Beger Synotex E-3000 alkali-resistant primer for new plaster. Old plaster: apply 1 coat of Beger UltraHide Primer B-2100 multi-purpose plaster primer (for new and old plaster)

Step 3: Topcoat – apply 2 coats of Beger Synotex Shield Max 100% acrylic water-based paint