Ben-Tone Plus for Exterior

Step 1 Surface preparation: New plaster – let the plaster dry completely for at least 1 month, with moisture content below 14%. Old plaster – scrub off deteriorated old paint; areas with mould or moss must be scrubbed with Beger MouldFree M-001. Tip: before every application, clean the surface so it is free of dust and cement residue, or sand off all dust first, and remove grease and other dirt. Repair and fill cracks in the surface with Beger Acrylic Filler No. 200

Step 2 Primer: New or old plaster: apply 1 coat of Bentone E-1000 alkali-resistant primer for new plaster and let it dry for at least 1-2 hours. For old plaster (previously painted, or plastered 6 months or more ago), apply 1 coat of Beger Contact Primer B-1500 old plaster primer and let it dry for 4-6 hours. Tip: if the plaster's moisture content is above 14% but no higher than 35%, we recommend applying Beger Water Block W-010 moisture-resistant plaster primer as the first layer and leaving it for 3-4 hours, followed by a moisture-resistant multi-purpose plaster primer, then applying a 100% acrylic topcoat

Step 3 Topcoat: apply 2 coats of Bentone Plus 100% acrylic water-based paint for exterior and interior use, letting the first coat dry completely for 2-3 hours before the next coat