Step 1
Step 1 Surface preparation: New plaster – let the plaster dry completely for at least 1 month, with moisture content below 14%, and clean the surface so it is free of dust and dirt. Old plaster – for old plaster or previously painted surfaces, always repair problem areas first, scrub off deteriorated old paint and then wash the surface clean. - For surfaces with peeling, blistering or chalking, strip off the old paint and then clean the surface. - For surfaces with mould or moss, scrub the surface clean, then apply 1 coat of Beger MouldFree M-001 mould and moss remover and leave it to dry for 1 day without rinsing. - For cracks up to 1 mm, fill with Beger Acrylic Filler F-200. - For cracks of 2-10 mm, fill with Beger Acrylic Sealant F-001
