BULL Ceiling Paint

Step 1 Surface preparation: New plaster: let the plaster dry completely for at least 1 month, with moisture content below 14%, and clean the surface so it is free of dust and dirt. Old plaster: for old plaster or previously painted surfaces, always repair problem areas first, scrub off deteriorated old paint, then wipe and wash the surface clean - For surfaces that are peeling, blistering or powdery, scrape off the old paint, then clean the surface - For surfaces with mould or moss, scrub and clean the surface, then apply 1 coat of Beger MouldFree M-001 mould and moss remover and let it dry for 1 day without rinsing off - For surfaces with cracks no wider than 1 mm, fill with Beger Acrylic Filler F-200 - For surfaces with cracks of 2 - 10 mm, fill with Beger Acrylic Sealant F-001

Step 2 Primer: New plaster: the surface must have dried for at least 1 month, with moisture content not exceeding 14%. Apply Bull KP300 alkali-resistant primer for new plaster and leave for at least 2 - 3 hours before applying the topcoat according to the system. Old plaster: apply 1 thin coat of Bull KP100 old plaster primer/primer sealer and leave for at least 8-16 hours, or apply 1 coat of Bull 2in1 primer and let it dry for at least 1-2 hours, then apply the ceiling paint according to the system

Step 3 Ceiling paint: apply at least 2 coats of acrylic ceiling paint, letting the first coat dry completely for 2 hours before applying the next coat