Ben-Tone Plus Ceiling Paint

Step 1 Surface preparation: New plaster: let the plaster dry completely for at least 1 month, with moisture content below 14%, and clean the surface so it is free of dust and dirt. Old plaster: for old plaster or previously painted surfaces, always repair problem areas first, scrub off deteriorated old paint, and then wipe and clean thoroughly. - For surfaces with peeling, blistering or chalking, scrape off the old paint and then clean the surface. - For surfaces with mould or moss, scrub and clean the surface, then apply 1 coat of Beger MouldFree M-001 mould and moss remover and let it dry for 1 day without rinsing it off. - For surfaces with cracks no larger than 1 mm, fill with Beger Acrylic Filler F-200. - For surfaces with cracks of 2 - 10 mm, fill with Beger Acrylic Sealant F-001

Step 2 Primer: New plaster: the surface must have dried for at least 1 month with moisture content no higher than 14%. Apply Ben Tone E-1000 alkali-resistant primer for new plaster and leave it for at least 2 - 3 hours before applying the topcoat according to the system. Old plaster: apply 1 coat of Ben Tone 2in1 primer and let it dry for at least 1-2 hours before applying the ceiling paint according to the system

Step 3 Ceiling paint: apply at least 2 coats of acrylic ceiling paint, letting the first coat dry completely for 2 hours before applying the next coat