Beger Tile-Bond

Step 1 Surface preparation: - Clean the surface so it is free of dust, dirt and grease, then let it dry completely. Good to know: grout tiles at least 24-48 hours after laying them

Step 2 Mixing: - Mix 3 parts Beger Tile-Bond grout to 1 part clean water by volume, or 1 kg of grout (1 bag) to 0.32-0.35 liters of water. - Pour the grout into the water and stir with a paddle or a low-speed drill until blended. After mixing, leave it for about 3-5 minutes to let the grout slake, and stir it periodically during use

Step 3 Application: - Use a rubber float to fill the joints completely, holding it at a 60-degree angle to the joint so the float does not pull the grout out of the joint. - Let the grout set for about 60 minutes, then wipe the whole area clean with a well-wrung damp cloth or sponge, and wipe the tile surface again with a dry cloth. - Let it dry completely for at least 1-3 days before use