Beger CeramicClean Primer #1200

Step 1 Surface preparation: - Scrub and wash off all dust and deteriorated old paint (avoid using a wire brush). - Wash areas with mould or moss with clean water, then treat them with Beger MildWash B-3600 mould and moss remover. - Fill and repair cracks: a. for hairline cracks and cracks of 0.1-0.3 mm, use Beger Acrylic Filler #200; b. for cracks wider than 0.3 mm or areas of the wall that may move, such as around door and window frames, use Beger Acrylic Sealant

Step 2 Primer: apply 1 coat of Beger Ceramic #1200 alkali-resistant primer for new plaster

Step 3 Topcoat. Conditions during application: the concrete surface should not have a moisture content above 14% by weight. New, unpainted plaster should be left to dry for at least 28 days before painting