Beger Primer Pro-100

Step 1 Surface preparation: The surface must be dry, clean and free of grease, dust, powdery rust and loose material. Surfaces with mould must be cleaned completely first with bleach, rinsed thoroughly, left to dry and then treated with Beger MouldFree M-001. For walls with cracks, fill cracks narrower than 0.3 mm with Beger Acrylic Filler F-200, or repair cracks wider than 0.3 mm with Beger Acrylic Sealant, and sand the repairs smooth before painting. Good surface preparation with no dusty or loose areas gives Beger Primer Pro 100 the best adhesion

Step 2 Primer: apply 1 coat of Beger Pro-100 new plaster primer, with no thinning required, and let it dry for at least 2 hours

Step 3 Topcoat: apply 2 coats of Beger 100% acrylic water-based paint, letting the first coat dry completely for about 2 hours