BegerCool 2in1 Semi-Gloss

Step 1 Surface preparation: New surfaces: let dry completely for at least 1 month, or until moisture content is below 14%. Old surfaces in good condition*: clean the surface so it is free of dust, mortar residue, grease and other dirt. Old surfaces: scrub off all deteriorated old paint with a plastic brush - If the surface has mould or moss, remove it with Beger MouldFree M-001 mould and moss remover - If the surface has hairline cracks or cracks of 0.3-2 mm, fill with Beger Acrylic Filler F-200 - If the surface has cracks of 2-10 mm, fill with Beger Acrylic Sealant F-001 *An old surface in good condition is one that is not chalky, peeling or blistering

Step 2 Primer: New surfaces and old surfaces in good condition: no new-plaster primer is needed. Old surfaces: apply 1 coat of Beger Pro Quick Primer B-1900 multi-purpose primer, according to the surface type

Step 3 Topcoat: apply 2 coats of BegerCool 2in1 self-priming acrylic water-based paint, letting the first coat dry completely for at least 2 hours before applying the next coat