BULL Acrylic Emulsion Paint Semi-Gloss

Step 1 Surface preparation New plaster: let the plaster dry completely for at least 1 month, with moisture content below 14%, and clean the surface so it is free of dust and dirt. Old plaster: for old plaster or previously painted surfaces, always repair problem areas first, scrub off deteriorated old paint, then wipe and clean thoroughly - For surfaces with peeling, blistering or chalking, scrape off the old paint, then clean the surface - For surfaces with mould or moss, scrub and clean the surface, then apply 1 coat of Beger MouldFree M-001 mould and moss remover and leave it to dry for 1 day without rinsing off - For surfaces with cracks no larger than 1 mm, fill with Beger Acrylic Filler F-200 - For surfaces with cracks of 2 - 10 mm, fill with Beger Acrylic Sealant F-001

Step 2 Primer New plaster: the surface must have dried for at least 1 month with moisture content not exceeding 14%. Apply Bull KP300 alkali-resistant new plaster primer and leave for at least 2 - 3 hours before applying the topcoat according to the system. Old plaster: apply 1 thin coat of Bull KP100 old plaster primer/old plaster primer solution and leave for at least 8-16 hours, or apply 1 coat of Bull 2in1 primer and leave to dry for at least 1-2 hours before applying the topcoat according to the system

Step 3 Topcoat Apply 2-3 coats of Bull acrylic paint, allowing the first coat to dry completely for 2 hours before applying the next coat